Everything you could think of

for your boat.

Permanent Painted Coatings (PPC) is a company that specialises in rust conversion and rust preventative paints.  They have become experts in rust prevention, repair, corrosion and general restoration in the building, motor, marine and industrial areas.  They stock many different products that literally cover your boat and protect, renew and revitalise it.

 Here are just a few of the product they have that can help with boating maintenance:

 POR-15 Rust Preventative Paint is directly imported from the USA where it has been used for over 40 years.  POR 15 Rust Preventive Paint stops rust and corrosion permanently. It is unlike any other paint coating you have used before. It's surface tolerant characteristics means it loves corroded and porous surfaces like rust, corroded aluminium, sandblasted surfaces, fibreglass and even concrete. It will seal them with with a ceramic like, rock hard finish that won't crack, chip or peel.

 Leatherique is another range direct from the USA that rejuvenates and cleans old and new leather and vinyl as well as repairing cracks and dyeing the leather.

SW 2 Protective Oil is similar to Fish Oils, but without that fishy smell and will penetrate into difficult to access areas. It is to be used where applying paints like POR 15 Rust Preventive Paint is hard or impossible, SW2 is the way to go.  It is ideal for the interior of vehicle doors, body panels, hollow sections of chassis, trapped recesses, etc.  SW 2 Protective Oil forms a water resistant, penetrating thin film which dries to a satin finish, and will help prevent condensation, corrosion in these areas.  SW 2 Protective Oil can also be used as a long term protective film on stored machinery, parts, castings and the like.  SW2 has low odour, is water resistant, easy to apply and has a satin finish.

Inox is the only lubricant in the world with the special mx3 anti-corrosion, anti-moisture formula.  It displaces, penetrates, lubricates and protects.

Inox is a quality product designed for heavy industrial use and where extreme climatic conditions prevail.  It contains no silicon, acid, dieselene or kerosenes, will not harm metal points, surfaces, plastics, paints, enamels or finishes, fibreglass, formica or neoprene seals and does not dry out, gum up, become gooey or sticky.  It won’t wash off with water!

Lanox for ..  Anchors-chains-shackle bolts: For good protection against corrosion & helps reduce fouling. Jet skis & outboards: Protects outboards, clamps, props & jet skis from salt water corrosion, will not harden or harm rubber fittings - Keeps control & steering cables & linkages in good working order, lubricated & corrosion free. Mooring & slips: Stops electrolysis - Keeps winches, cables, slip cradles & wheel bushes lubricated & corrosion free Protection for electricals from moisture & salt air corrosion.  Protection: Protection for painted & bare metal surfaces in the open under adverse conditions from moisture & corrosion. Protects all bare & untreated timber from water & dry rot - It may darken slightly bare or untreated timber, but it will not harm it.  Trailers: Boat, Box, Car & Horsefloats, spray on chassis, springs, axles, hinges, couplings winches, cables, light fittings & electricals for protection from salt air corrosion & moisture.  Thread anti-seize: Spray on all metal threads before joining, stops threads corroding together makes it easier to undo the joint, nut or bolt later.

Deox-C is a crystalline, 100% active corrosion removal product formulated for the removal of corrosion products from steel, stainless steel and most ferrous materials. This product, when dissolved in tap water, produces a bath of powerful rust removing liquid.  It is extremely economical, for example just 1 kilogram of Deox C makes up to 20 litres of powerful rust removing bath.  It will remove very heavy corrosion, but is safe to use on even the most delicate items. It is suitable for any object that can be completely immersed.  Deox-C is harmless, non toxic and biodegradable and comes in a gel that will stick to vertical surfaces.

These are just a few of the products that PPC carries in its arsenal to combat rust and general wear and tear on your boat.  As a boat owner, CEO, Rob Harrington-Johnson is passionate about fighting rust and helping fellow boat owners get the best out of his products.  Just a phone call away, he is available to answer your questions and point you to one of their 70 dealers Australia wide.  When in doubt – phone and ask.

 To get your hands on the free Restorers catalogue PPC on 1800 643 229 and they will mail it out directly.

 For further information please contact Rob Harrington-Johnson on 1800 643 229. 

Permanent Painted Coatings (PPC) is a company that specialises in rust conversion and preventative paints.  They are experts in rust prevention, repair, corrosion and general restoration in the building, motor, marine and industrial areas.  POR-15 Rust Preventative Paint is cornerstone of the business because it is a product that works.  PPC imports directly from the USA where it has been used for over 30 years.

 What is POR-15? POR-15 is a high-tech, high performance rust preventative coating designed for application directly on rusted or seasoned metal surfaces.  It dries to a rock-hard, non-porous finish that won’t chip, crack or peel and it prevents rust from recurring by protecting metal from further exposure to moisture. Perfect to use on any metal.

 MARINE-CLEAN™ cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents.

METAL-READY™ provides the best adhesion for POR-15® on any surface, including aluminum and shiny polished metal surfaces.

POR-15® is a rust-preventive coating designed for application directly on rusted or seasoned metal surfaces.

A Complete System. POR-15 products are designed to work as a complete system. When used together these products provide you with a coating that will not only stop rust and corrosion, but will prevent it from returning. The products are available individually and many are available in efficient cost savings kits geared to your specific restoration needs.

What’s the Secret? POR-15 chemically bonds to the rusty surface and sets up a hard coating that is resistant to most chemicals and acids, is totally water proof and loves corroded and porous surfaces like rust, corroded aluminium, sandblasted surfaces, fibreglass and even concrete.

POR-15 Rust Preventive Paint's secret lies in its curing process, unlike ordinary paints POR-15 Rust Preventive Paint cures by drawing moisture from the atmosphere. Other paints cure through the process of solvent evaporation (leaving tiny pores in the paint) that's why you can smell a paint job for weeks. Those same pores allow microscopic amounts of air and moisture to gradually reach the surface of the painted metal and eventually rust.  Whilst POR-15 can be sprayed it can be brushed to give a "virtual spray finish" look.

POR-15 Rust Preventative Paint is easy to use, whether for small jobs or large, being single pack and self leveling (no brush marks).  In fact use POR-15 on anything you want to protect permanently from rust, corrosion, stone chips or abrasion.  POR -15 is not UV stable and will discolour under prolonged sunlight.  If exposed, it needs to be a top coated. PPC have a range of very tough Top Coats.

Everyone who uses POR-15 are amazed with the results.  Car chassis, engines, callipers, suspension, gearboxes, winches, battery casings, exhausts, keels, fuel tanks are just a few of the places you can use POR-15.

CEO, Rob Harrington-Johnson loves a challenge.  Give him a call with your query about POR-15.  He is available to answer your questions and point you to one of their 70 distributors Australia wide.

To get your hands on the free 32 page catalogue which shows their whole product range to help the restorer, call 1800 643 229 and they will mail it out directly.  Alternatively look at the PPC website with all sorts of examples and the full product range. www.ppcco.com.au